Company

OEM Solutions

Masimo’s breakthrough noninvasive monitoring technologies can be integrated into a range of multi-parameter and multi-use monitoring devices with our family of MX and MSX series circuit boards and unique health module.

Discover leading patient monitoring equipment manufacturers offering noninvasive monitoring technologies.

OEM Partners

 

Discover easy-to-integrate, flexible solutions for measuring respiratory gases in a wide range of clinical applications.

Capnography & Multigas Solutions

 

The Masimo MW-1™ module brings accurate, reliable, continuous measurements to wrist-worn, wearable OEM devices. As a complete biometric sensor, Masimo MW-1 continuously measures oxygen saturation (SpO2), pulse rate (PR), and respiration rate (RR), heart rate (HR), as well as spot-check ECG, steps, and activity.

MX series boards, when used with the applicable Masimo sensors, are capable of providing the full suite of Masimo rainbow® measurements, including Oxygen Reserve Index (ORi™), Total Hemoglobin (SpHb®), Oxygen Content (SpOC™), Carboxyhemoglobin (SpCO®), Methemoglobin (SpMet®), Pleth Variability Index (PVi®), and Respiration Rate from the Pleth (RRp®), in addition to Masimo SET® Measure-through Motion and Low Perfusion™ pulse oximetry measurements SpO2, Pulse Rate, and Perfusion Index.

The MSX-2040 board uses about a third of the power and is only half the physical size of previously available Signal Extraction Technology® pulse oximetry solutions—while providing the same proven Measure-through Motion and Low Perfusion capabilities.

The MSX-2040 board is also available as an external “board-in-cable” solution embedded within a completely self-contained patient cable* (uSpO2), providing Masimo SET® pulse oximetry measurements and Pleth Variability Index (PVi)  externally for existing devices not presently compatible with integrated pulse oximetry solutions.

Also now available are SedLine® Brain Function Monitoring and O3 Regional Oximetry as Masimo Open Connect® (MOC-9®) Measurement Modules.

*This cable is also available unterminated.

Masimo MW-1

Masimo Health Module

Dimensions and specifications for the Masimo MW-1 board are as follows:

  • Size: 1.196 inches by 1.196 inches
  • Module Thickness: 0.208 inches
  • Parameter Capability: oxygen saturation (SpO2), pulse rate (PR), and respiration rate (RR), as well as spot-check ECG, steps, and activity
MW-1 Product Bulletin

 

MX-7

Masimo rainbow SET® OEM Board

Dimensions and specifications for the MX-7 board are as follows:

  • Size: 2 inches by 2.5 inches
  • Board thickness: 0.062 inches
  • Mounting hole diameter: 0.125 inches

MX-7 Product Bulletin

 

MSX-2040D

Masimo SET® OEM Board

Dimensions and specifications for the MSX-2040D are as follows:

  • Size: 1.14 inches by 1.80 inches
  • Board thickness: 0.062 inches
  • Mounting hole diameter: 0.110 inches

MSX-2040D Product Bulletin

 

SedLine Module

SedLine Brain Function Monitoring with Masimo Open
Connect (MOC-9) Measurement Module

Typical Module Dimensions:

  • 1.3 in (3.3 cm) Width
  • 4.0 in (10.2 cm) Length
  • 0.8 in (2.0 cm) Thickness
  • 12 ft (3.6 m) Cable Length
SedLine Product Bulletin

 

O3 Module

O3 Regional Oximeter with Masimo Open Connect
(MOC-9) Measurement Module

Typical Module Dimensions:

  • 1.8 in (4.60 cm) Width
  • 4.0 in (10.2 cm) Length
  • 1.25 in (3.2 cm) Thickness
  • 12 ft (3.6 m) Cable Length
O3 Product Bulletin

uSpO2 USB Cable

Masimo SET® Pulse Oximetry Cable

Dimensions and specifications for the uSpO2 USB cable are as follows:

  • Size: 1.20 inches by 3.60 inches
  • Thickness: 0.90 inches
uSpO2 USB Product Bulletin

 

  • For professional use. See instructions for use for full prescribing information including indications, contraindications, warnings and precautions.

PLCO-007092/PLM-12075D-1223